TECORE Wireless Systems
The AirCore System
Systems Integration
Advantages
News and Events
Career Opportunities
Let's Talk
About Us
7165 Columbia Gateway Dr. • Columbia, MD 21046 USA • +1.410.872.6000 • info@tecore.com  
Taking communications to places it's never been before.
Home >  The AirCore System >  Network Protocols >  TDMA >  TDMA Specifications

 

TDMA Specifications
(To save a PDF of these specifications to your hard drive, click here)

 

 
System Capability
Non-Blocking Switching Matrix   4096 Ports Per Shelf
Switching Matrix Architecture   Distributed
Processor Architecture   Distributed
Capacity   Up to 128 T1/E1 Interfaces per Stackable Shelf
System Level Fault Tolerance   Hot-Swappable Components/Interfaces
Wireless Interfaces
Base Station Interface   IS-634 A-Interface
Network Interface   ANSI-41 MAP
Network Interfaces
Interfaces Supported   T1, E1, Analog Trunks
Signaling Protocols   SS7, CCS7, ISUP, ISDN, PRI, R1, MFC-R2, DTMF, MF, DP
Hardware Configuration
CPU   Intel Processor Family
Mass Storage   Dual, Mirrored Redundant Disks
Power Supply   Redundant, Hot-Swappable
LAN Interface   Ethernet, TCP-IP

Network Switching
Subsystem Functional Elements

Mobile Switching Center (MSC)   Scalable to 128 T1/E1
Visitor Location Register (VLR)   Scalable from 100 to 100,000 Subscriber Profiles
Home Location Register (HLR)   Scalable from 100 to 1,000,000 Subscriber Profiles
Authentication Center (AC)   Supports CAVE Algorithm Calculations
Short Message Service Center (SMSC)   Scalable from 1000 BHSM
System Features
Fully GUI Driven Network Management System   On Line Context Sensitive Help
Mobility Management   Roaming, Call Delivery, Feature Management
Voice Mail   Short Message Service
Prepaid Services and Hot Billing   Flexible Routing/Rating/Configuration
Location Sensitive Emergency Call Routing   Authentication and Ciphering
Virtual Private Networks   Alternate Routing
PBX Extension Dialing   Remote Feature Control
Subscriber Selectable Announcements and Language   Gateway Tandeming
Traffic Measurements   Network Status Reporting
Multiple Third Party Base Station Support   Local and Remote Maintenance
TDMA Subscriber Features
Call Forwarding Unconditional (CFU)   Call Waiting (CW)
Call Forwarding Busy (CFB)   Three-Party Conference (3WC)
Call Forwarding Not Available (CFNA)   Call Transfer (CT)
Call Forwarding Default (CFD)   Priority Access Channel Assignment (PACA)
Calling Number ID Presentation (CNIP)   Remote Feature Control (RFC)
Calling Number ID Restriction (CNIR)   Selective Call Acceptance (SCA)
Do Not Disturb (DND)   Subscriber PIN Intercept (SPINA)
Flexible Alerting (FA)   Subscriber PIN Intercept (SPINI)
Message Waiting Notification (MWN)   Barring All Outgoing Calls (BAOC)
Mobile Access Hunting (MAH)   Barring All Incoming Calls (BAIC)
Password Call Acceptance (PCA)   Barring All Incoming Calls While Roaming (BAIC-Roam)
Voice Mail Service (VMS)   Barring All Outgoing International Calls (BOIC)
Voice Mail Retrieval (VMR)   Remote Feature Control (RFC)
Physical
Dimensions   D x 21" H (Rack Mountable)
Weight   100 lbs (37KG)
Power   Auto-Ranging 110-220V AC, 350W, 50/60Hz
or -48V to -60V DC, 350W
Cooling   Fan Forced Air
Operating Environment    
Temperature   -5 degrees C to 45 degrees C
Humidity   5% to 95%


All information and specifications are subject to change without notice. While this literature provides general information on product performances and use, it is not contractual in nature, nor does it provide warranty of any kind. TECORE, Inc. reserves the right to change specifications as progress in engineering, manufacturing or other circumstances may warranty. Some features are under development. Actual capacity will vary based on specific application and hardware configuration. AirCore® is a registered trademark of TECORE, Inc.

 
   
Home  •  The AirCore® System •  Systems Integration •  Advantages
News & Events •  Career Opportunities •  Let's Talk •  About Us

©2002 TECORE, Inc. All rights reserved.